1.8.1b Parameter Lane Draws In Wrong Parameter Lane

Product Feedback / 产品反馈 / フィードバック
1

PARAMETER LANE DRAWS IN WRONG PARAMETER LANE

Drawing in multiple lanes get mixed up with Vocal Modes vs Parameter

STEPS

  • Create 2 parameter lanes, set lane 1 to (a Vocal Mode) ie. Power, set lane 2 to (a Parameter) Loudness
  • Draw in the Loudness lane
  • Now Draw in the Power lane
  • Now Draw in the Loudness lane again
  • The Drawing occurs in the Power lane ?
  • Change the Loudness lane to Tension then back to Loudness, Draw in Loudness, the drawing now occurs correct

If you now ADD another Vocal Mode to Lane 1 and draw in Lane 2 then the problem starts over again
Even worse, if you change Lane 1 into the 1st Vocal Mode, now it still draws into the 2nd Vocal Mode:\

1 Like